What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 10:05
[old diagram got deleted by accident]
One
This is 'the assistant's answer'
2025 Freestyle Wrestling U20 World Team Trials Results - FloWrestling
Upvotes:
The third is lightning and “how it gets conducted into a home.”
So, the voltage could go up to 500 volts, and the fuse will not open up.
Now when you have a certain ac resistance, then a current flows in a loop.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Samsung could drop Google Gemini in favor of Perplexity for Galaxy S26 - Ars Technica
The other is “what does a “fuse” do?”
the problem then depends on "how fast does the fuse operate?".
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is where the MOV conducts again, and dissipated the energy.
Here is a simplified AC power diagram.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Why is there a lack of affordable housing in the USA despite a surplus of empty homes?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A circuit breaker is similar, but is resettable.
The bolt then partially travels down the line to your home.
Top prospects for 2025 Draft arrive in Buffalo for Scouting Combine - NHL.com
Barnstars:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
eight
Ultra-thin lenses halve incident wavelength to make infrared light visible - Phys.org
what exactly is a ‘surge’ protector?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Scientists develop 'mosquito STD' to combat malaria - Phys.org
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
[image of Common-mode choke]
This device then solves the entire problem.
but this device (an Inductor) … impedes the rapid changes in the current.
One is “what exactly is in a ‘surge protector’ ? ”
He then asserts :
(Dc diagram shown, AC is similar).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A fuse is a non-resetable over current circuit protector.
a photo is worth a thousand words.
In schematic diagrams this is the symbol for a fuse:
There are three different concepts here that are getting confused.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
First Sentence:
At one ohm, the resistor has a maximum of 1 watt power.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I post the exact comment here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes Rainy Season and Lightning.
It also is a device that limits the change in current flow.
Edit 2024–10.
There are two important concepts here.
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–10[John johnson John Johnson ]
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What is lightning?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
What does a fuse do?
This one hit behind the barn.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
These are simplified answers to the original question, and does not change anything I wrote above.
At least they know the answer if they wanted it.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Can the fuse protect the electronic devices from lightning instead of a surge protector.